A 2-component, UV-resistant, low viscosity methyl methacrylate (MMA) based sealer for Flowfast floor coatings. In its liquid state it is blue/violet in colour, which is no longer visible after polymerisation (curing).
Flowfast Standard Seal is used as a general purpose sealer for smooth or lightly textured profiles, primarily in Flowfast systems with decorative aggregates and flakes (e.g. Flowfast Quartz, Flowfast Quartz Scatter and Flowfast Flakes).
For areas that are exposed to intense wheeled traffic and/or spillage of aggressive chemicals we recommend the first sealer layer to be done with Flowfast Standard Seal followed by a second coat of Flowfast Hard Seal, which provides a harder surface.
For areas that are exposed to spillage of hot liquids and/or frequent water load in combination with chemicals we recommend the use of Flowfast Flexible Seal, which provides a more resistant surface. If two seal coats are required, the first sealer layer may be done with Flowfast Standard Seal followed by a second coat of Flowfast Flexible Seal.
A permanent water loading can result in a white discolouration of the Flowfast Standard Seal. Therefore, always gather waste or flowing water (particularly hot) into channels and convey into a proper drainage system. Provide for a sufficient number of gullies.
