Flowchem VE GL Flex
Vinyl ester-based lining system
Flowchem VE GL Flex is a modified and thermal shock resistant, shrinkage compensated and modified vinyl ester based lining system. Is used with Flowchem VE Chopped strand mat M2 and Flowchem VE Surface tissue.
To ensure best application behaviour of material it is recommended to condition the containers for at least 24 hours in +15 °C - +25 °C prior to application.
The recommended substrate temperature is 15 - 25°C, but not less than 5°C and more than 30°C.
During application and initial curing of product, substrate temperature needs to be at least 3°C higher than dew point temperature.
To assess possibility of application outside of these conditions or application temperatures, please consult our Technical Department.
The styrene in the resin component can be smelt at very low concentrations (from 2 ppm onwards). Follow the appropriate national guidelines.
.png)
Flowchem VE GL Flex Green (~RAL 6002).png
.png)
Flowchem VE GL Flex Dark Grey (~RAL 7046).png
.png)
Flowchem VE GL Flex Light Grey (~RAL 7035).png
.png)
Flowchem VE GL Flex Red (~RAL 3009).png
- Fast curing.
- High thermal shock resistance. Can take heavy thermal shocks with a delta T of over 220°C.
- Excellent temperature resistance. In service up to 145-165°C.
- Very high chemical resistance to a wide range of acids, alkalis, bleaches and solvents.
- High mechanical resistance. Tolerates heavy loads. High elongation and toughness.
